Opticlimate 15000 Pro 3 15KW cooling capacity

Product Name: 15000 Opticlimate Pro 3
Dimensions: 1230 x 810 x 545mm
Weight: 160kg
Water consumption: 5 to 9 liters per minute (depending on cooling water temperature)
Voltage: 400V
Connection: 3 phase + 5x4 mm² D20-3F Machines
Heaters: 3x2700W

If only in the Netherlands, we have a showroom where Opticlimate already working to see where you as a customer are warmly welcome to visit by appointment. The Opticlimate is a new solution for controlling the climate in your greenhouse or grow room.

OptiClimate water-cooled air conditioner is a new solution for controlling the indoor climate. OptiClimate can circulate, cool, heat, dehumidify and filter. There's more than five years of development and testing in the OptiClimate. This has resulted in a fully developed and optimized product that climate arrange to perfection is, with the lowest possible power consumption.

OptiClimate cools the air using water as a cooling medium and heat through ceramic heating elements. Because water is a much better cooling fluid than air is here in relatively little of need. The OptiClimate has a water outlet. The input is connected to the water supply. The drainage is connected to the sewer with a possible branch to a water or nutrient. The cold water is used to cool the air with the result that it warms to 40-50 ° C. This warm water is discharged into the sewers or be used for other purposes, such as underfloor heating in your room.

The included remote is also a controller that all processes are fully automated and can be followed. After setting-off with the remote control with the minimum temperature (night), maximum temperature (day) and times OptiClimate will warm or cool depending on the night or day mode. The pre-set temperatures are not exceeded.

During daytime operation (cooling) OptiClimate dehumidify the air. Should it be desirable OptiClimate can also dehumidify the night conditions so that the humidity is optimal.

There is a OptiClimate of 2KW, 3,5KW, 6KW, 10KW and 15KW cooling capacity. Multiple OptiClimates can be placed in a space, depending on the need for cooling capacity. The stated capacity is the maximum, there can be cooled at all times less.

Through the use of oversized heat exchangers and the water as cooling medium is a very high efficiency and therefore had low consumption current.

One 22MM copper pipe can be connected to a total of about 45 to 60KW of cooling, it is possible on a 16MM copper pipe to connect up to 25KW cooling capacity.

Because the Opticlimate is placed in a (semi) closed system, it is very easy to add without much waste, CO2 to the culture space, wherein the air is continuously recirculated. Since only will there not require large CO2 installations rather limited exports of air and sufficient models to 4Q of power.

The Opticlimate PRO 3 Series is a unique solution to the indoor environment into
arrange perfection. it is possible by the cooling function and heating to 365
days per year to achieve a stable environment in which you are never dependent
outdoor climate.

it is possible by means of a printed circuit board with sophisticated software to
to adjust various settings, so it is now possible to warm slowly to room, and cool down, even if the assimilation lighting is turned off.